Web Installer for ESP32

1. Connect the ESP32 device to your computer
   using USB or serial-to-USB adapter


2. Select the firmware variant suitable for
   your device


3. Hit "Install" and select the correct port
4. Uncheck the "Erase device" box to flash only
5. Check the "Erase device" box to erase + flash

Phc2Mqtt v4.2.0.f for ESP32 WROVER 4Mb/8Mb (partition v2) Phc2Mqtt v4.2.2.7 for ESP32 WROVER 4Mb/8Mb (partition v3)

Your browser does not support Web Serial.
Open this page in Google Chrome or
Microsoft Edge instead (but not on your iOS device).